Electrochemical machines SFE-5000М, SFE-8000М, SFE-12000М can be installed in any heated room with a level concrete floor. At the factories such machines are installed in processing lines of tool and machine workshops or in a separate room without any special requirements to operation of metalworking machinery. It is allowed to install the machine near metal-cutting […]Read more
On the basis of application of electrochemical machining method in various industries for many years using SFE electrochemical machines, Limited Liability Company Manufacturing and Commercial Enterprise STANKOFINEXPO specialists recommend to use 12% water solution of industrial sodium nitrate (NaNO3) (ammonium nitrate) GOST 828-77 with 120g/l concentration as electrolyte solution, as it has good tracing characteristics […]Read more
The electrochemical processing with SFE machines is performed at a low voltage with the help of 12% water solution of sodium nitrate (NaNO3), which is environmentally friendly and electrically safe. During the operation of SFE machines no polluting substance emission, affecting the environment and personnel health, happens. All SFE electrochemical machines produced nowadays […]Read more
Technological Advantages of Dimensional Electrochemical Machining with SFE Machines in Comparison wi...
SFE-4000М, SFE-5000М, SFE-8000М electrochemical machines operate applying the technology of dimensional electrochemical pulse processing, related to electrophysical and electrochemical methods of metal processing. This electrochemical machining technology (ECM) has technological advantages in comparison with the following traditional methods of manufacturing die tooling, finished dies, matrices, punches: the most wide-spread as of today thermal […]Read more
SFE electrochemical machines produced by the Manufacturing and Commercial Enterprise STANKOFINEXPO, LLC are intended for dimensional electrochemical machining of shaping surfaces of die tooling, matrices, cavities and parts of press molds, punches, tooling for press tools regardless of raw material hardness. <ul> <li>Electrochemical machining technology (ECM) can be used for processing of practically the […]Read more
Electrochemical machining (ECM,PECM) is a modern high-tech high-precision method of machining conducting materials and alloys, which is based on fast dissolution of the processed item material with simultaneous exposure to pulse current with electrolyte running through the interelectrode spacing between the processed item material (anode) and tool electrode (cathode). During the process of dimensional […]Read more